Bosch Dishwasher SMS65E18 GB/33 dead Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch Dishwasher SMS65E18 GB/33 dead This topic has 5 replies, 3 voices, and was last updated 9 years, 7 months ago by smeghead. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts September 8, 2016 at 4:55 pm #89255 smegheadParticipant This one lights up, (hooray) , starts to pump (good) begins to fill & then after about 10 seconds shuts down completely- no display , nothing. Have visually checked main PCB & front control , both look ok. but who knows ? Mains in ok too. Any one had this before , Thanks. Clive. September 8, 2016 at 9:24 pm #440814 electrofixModerator Re: Bosch Dishwasher SMS65E18 GB/33 dead sounds like a power supply issue on the board assume if you turn off and on again it repeats Dave September 9, 2016 at 7:49 am #440815 smegheadParticipant Re: Bosch Dishwasher SMS65E18 GB/33 dead Yes Dave, have to leave it about 3/4 mins to reboot. Guess I’ll try a Board & hope !! Thanks for reply. Clive September 9, 2016 at 10:32 am #440816 nomadPaulParticipant Re: Bosch Dishwasher SMS65E18 GB/33 dead Is this the module at the bottom back right? Remember that they normally come unprogrammed so make sure tippy order the right one . September 9, 2016 at 10:54 am #440817 electrofixModerator Re: Bosch Dishwasher SMS65E18 GB/33 dead hi Paul as a matter of interest can you get the boards pre programmed if not I assume you needs all sorts of kit and access to the software Dave September 9, 2016 at 11:15 am #440818 smegheadParticipant Re: Bosch Dishwasher SMS65E18 GB/33 dead Yep, programmed board ordered. Thanks. Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In