Bosch dryer wtl6103gb/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch dryer wtl6103gb/01

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 10, 2013 at 8:27 am #77537
    tash
    Participant

    hi just been to fit a heater to the above which had shorted out.. fitted new element out on test with wet load all working ok element cut in after few tumble had back off to check heater working when it started to glow switched off dryer by turning knob to off but noticed when I put dryer knob back to any setting the heater immediately came back on without the fan working .. any ideas? ok when reset but seems dangerous if customer end program early

    October 10, 2013 at 9:43 am #402469
    Martin
    Participant

    Re: Bosch dryer wtl6103gb/01

    Oh dear PCB fault. 🙁

    October 10, 2013 at 9:55 am #402470
    tash
    Participant

    Re: Bosch dryer wtl6103gb/01

    thought as much.. n they are bloody expensive.. thanks for quick reply anyways

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.