Bosch error code?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch error code?

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • January 22, 2008 at 3:57 pm #33962
    Martin
    Participant

    I’ve a customer thats got a WDI1640 and apparently shows E14 shortly after the programme starts?….Any idea what that means guys please?

    January 22, 2008 at 4:50 pm #240689
    timdowning
    Participant

    Re: Bosch error code?

    Dryer NTC or wiring if like the bosch washer dryers.

    January 22, 2008 at 4:52 pm #240690
    Martin
    Participant

    Re: Bosch error code?

    timdowning wrote:Dryer NTC or wiring if like the bosch washer dryers.

    Nice one Tim….thanks!(I’m going to see it Thursday…will report back) :tup:

    P. S Whoops Greg I deleted your post….didn’t mean to, just finger trouble my end….sorry 😳 Thanks Greg anyway… 🙂

    January 22, 2008 at 5:02 pm #240691
    gegsy
    Participant

    Re: Bosch error code?

    Its a Smeg in a skirt IIRC

    Greg

    January 22, 2008 at 5:04 pm #240692
    gegsy
    Participant

    Re: Bosch error code?

    Martin wrote:P. S Whoops Greg I deletyed your post….didn’t mean to, just figure trouble my end….sorry 😳 Thanks Greg anyway… 🙂

    Bloody moderators, bit like buses 😆
    You have mail BTW 😉

    Greg

    January 22, 2008 at 5:06 pm #240693
    Martin
    Participant

    Re: Bosch error code?

    gegsy wrote:Bloody moderators, bit like buses 😆

    I’m No 101 going to PECKHAM then back to the bus depot….where are you going? :rotl:

    January 22, 2008 at 5:08 pm #240694
    gegsy
    Participant

    Re: Bosch error code?

    Rhyl 😥

    January 22, 2008 at 5:13 pm #240695
    Martin
    Participant

    Re: Bosch error code?

    gegsy wrote:Rhyl 😥

    Our paths will cross then…I’ll give you a toot (if you’ll pardon the expression?) as we pass. :rotfl:

    Thanks for the pdf by the way. 😀

    January 28, 2008 at 3:54 pm #240696
    Martin
    Participant

    Re: Bosch error code?

    Well I’m a bit stumped on this?

    I changed the dryer NTC as the error code points to that as being the fault. But oddly enough the machine works fine on each and every seperate drying cyle, no probs…perfect! 🙂

    Put m/c on a wash cycle and it washes for 30 odd minutes and before it come to rinse, bleeps and shows E14. 😕

    Put the machine on a seperate rinse and spin and its fine also?

    According to the info I have, if it was a fault with the wash NTC then E4 would show not E14……what is going on here I wonder? Also…..in both cases if the NTC’s are faulty then the error will show within 30 seconds of the programme starting. How come it is on more that half an hour before it shows an error? 😕 😕

    January 28, 2008 at 5:54 pm #240697
    nomadPaul
    Participant

    Boy , do i dislike these machines !!! I get the right ‘ump when i see one of these piles of Smeg toot on my daily worksheet .
    The only odd one of these i had , giving a spurious error code , was caused , i thin , by a dodgy sounding motor Martin…..but i wouldn’t swear 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} by that.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.