Bosch Neff Siemans

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #84911
    djohnston
    Participant

    Has anyone got the link to the Bosch Neff Siemans web site were you can view exploded diagrams of appliances.

    #427144
    iadom
    Moderator

    Re: Bosch Neff Siemans

    They all have their own dedicated site, just Google each brand and make sure you go to the official web site and follow the links.

    #427145
    don
    Moderator

    Re: Bosch Neff Siemans

    Hi

    Public site for all BSH brands is here then follow the links.

    There is a trade site here but you will need to apply for access.

    Don

    #427146
    RHrepairs
    Participant

    Re: Bosch Neff Siemans

    Hi Don,
    How does one apply for access to the trade site?
    thanks

    #427147
    don
    Moderator

    Re: Bosch Neff Siemans

    Hi

    Trade access details.


    Don

    #427148
    RHrepairs
    Participant

    Re: Bosch Neff Siemans

    is it possible to get service manuals etc off them then?

    #427149
    don
    Moderator

    Re: Bosch Neff Siemans

    You’ll be lucky :rolls:

    Parts list and explosion is all you get.


    Even the local BSH engineer is reluctant to give any info out!!


    Don

    #427150
    Martin
    Participant

    Re: Bosch Neff Siemans

    don wrote:You’ll be lucky :rolls:

    Quite so 🙁

    Whatever did happen when white goods trade associations tried to lobby parliament into implementing ‘White goods block exemption’ anyway? The motor trade succeeded many years ago and the independent trade has benefited ever since.

    Unfair practices in the white goods trade affects far more people than the motor trade. And the industry has run roughshod with their unfair practices for more than two generations all the while.

    Too little has been done too late I suspect. Too many brick walls and no bulldozer.

    You can get tech info from BSH but you need to know someone within in order to get it. The trouble I found was that sharing that information here on UKW meant it immediately got published in the public forums and hence into the public domain seconds later. Vital trade only stuff leaked meaning the independents suffered.

    So, in effect we have the devil or the deep blue sea. If the manufacturers were forced to give the trade full tech information/co-operation to approved independents that same information would get onto the Internet public domain in an instant.

    BSH employees will get instant dismissal for sharing info, likewise will many of their competitors employees. So from now on in technical stuff will be harder to obtain. And if you can get any info then my advice is to think carefully before sharing it with others on the Internet.

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.