Bosch Pcb

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch Pcb

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 18, 2011 at 3:40 pm #60294
    spanishwhite
    Participant

    Please excuse me if i’m being a thicko but having ordered a new pcb for a bosch I find that i’m supposed to configure it for the machine as it covers various models.Having never done this before i am at a loss as to do it.
    I have been given some paperwork none of it makes any sense to me as i cant seem to acess a program in the machine.
    Am i being stupid and missed the obvious?
    Steve

    January 18, 2011 at 4:00 pm #341665
    iadom
    Moderator

    Re: Bosch Pcb

    Post up the full Enr and someone may be able to help, hopefully the spanish sourced machines will be within their compass.

    January 18, 2011 at 4:10 pm #341666
    spanishwhite
    Participant

    Re: Bosch Pcb

    Ok,just to make it a bit more difficult it is a Dutch model Wfo2452nl/07,
    however it seems to be identical to wfo2467gb/01 as the parts list is identical on the Bosch website.
    Steve

    January 18, 2011 at 4:14 pm #341667
    Martin
    Participant

    Re: Bosch Pcb

    It’s probably THIS ONE? our amigo refers to. 8)

    (That being the case we’ll have to advise him on avoiding raising too many threads on one subject perhaps eh Jim?:wink:)

    Can you email me the instruction sheet you have for it and I will do my best to help? Once you’ve done one it’s a walk in the park really. All to do with recognising the various machine options and selecting the appropriate DIP switches to correspond…as a rule.:D

    Scan it and email in my way hombre’…. 8)

    January 18, 2011 at 4:39 pm #341668
    spanishwhite
    Participant

    Re: Bosch Pcb

    Thanks Martin

    January 19, 2011 at 6:44 pm #341669
    spanishwhite
    Participant

    Re: Bosch Pcb

    Just to put this post to bed,problem sorted.All I needed was a better pair of specs to see the dip switches.
    As Martin said it was a walk in the park.
    Thanks again.
    Steve

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.