Bosch S5443X1GB/17 buzzer.

[aqualectric]

Bosch S5443X1GB/17 dishwasher. FD8007.

I fitted a new PCB (264882) and the customer is complaining that the ‘End’ buzzer is sounding 2 beeps every few minutes continuously until she switches it off. She runs the machine at night and the buzzer wakes her up. :rolls:
The old PCB did not do this, so as the new PCB part number was shown on BSH site as superceded to 264882, then I can only assume the boards are slightly different.
Anyone know how to switch off the buzzer apart from removing it from the PCB? Is there a method for doing this?

Thanks,

Steve.

[geoff1]

Re: Bosch S5443X1GB/17 buzzer.

End of programme

The programme has come to an end when
the PROGRAMME END indicator 3 and
the indicator for the selected programme
are both lit up.
Apart from this, the end of the programme
is indicated by a buzzer. This function can
be changed as follows:–
Hold down the function button C (3rd button in from left ) and
switch on the main switch 1 .
Function button C flashes.
Each depression of function button C
changes the buzzer in 4 stages (from
off to loud).
Switch off the main switch 1 .
The setting is stored.
Switching the dishwasher

On page 17 of instruction manual and if user has not got can get copy from from BSH site

HTH

Geoff

[aqualectric]

Re: Bosch S5443X1GB/17 buzzer.

Thanks, Geoff – maybe that should be posted in “Known Error Codes”?

Steve.

[superfix]

Re: Bosch S5443X1GB/17 buzzer.

maybe she should read her instruction book 😀

[Martin]

Re: Bosch S5443X1GB/17 buzzer.

superfix wrote:maybe she should read her instruction book 😀

…..or download a copy off the BSH web site. 💡

[Author]

Posts