Bosch SGS4072GB/02 F/S Dishwasher No Water Problem Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGS4072GB/02 F/S Dishwasher No Water Problem This topic has 4 replies, 3 voices, and was last updated 13 years, 5 months ago by jontymox. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts October 22, 2012 at 12:38 pm #72075 jontymoxParticipant Good afternoon all, Wondering if anyone can offer any advise on the above problem? No water is entering m/c, so tested water supply, (fine)and inlet valve electrically which gave a good ohms reading. However, suspected solenoid faulty, and confirmed power reaching valve. Therefore, renewed suspect valve… and same problem. As not much experience on dishwashers, should I now be checking matrix area? Any help appreciated. Jon October 22, 2012 at 12:48 pm #383375 MuvParticipant Re: Bosch SGS4072GB/02 F/S Dishwasher No Water Problem Check out the jug impeller…the small round plastic part,that’s the first thing after the water feed valve… If that’s ok,mother check out the matrix.. Martin October 22, 2012 at 12:50 pm #383376 MuvParticipant Re: Bosch SGS4072GB/02 F/S Dishwasher No Water Problem Mother, is what my iPad, decided was the word I wanted to put! No IPad! The word I wanted to put was “then” Lol M October 22, 2012 at 12:52 pm #383377 MuvParticipant Re: Bosch SGS4072GB/02 F/S Dishwasher No Water Problem After first checking the inlet valve is in fact opening correctly to feed the water in! October 22, 2012 at 1:17 pm #383378 MartinParticipant Re: Bosch SGS4072GB/02 F/S Dishwasher No Water Problem jontymox wrote:As not much experience on dishwashers, should I now be checking matrix area? First place to look to be honest. This model doesn’t have an impeller jug by the way. Also the mechanical timer is a caution. 😉 Author Posts Viewing 5 posts - 1 through 5 (of 5 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In