Bosch SGS5312GB/12 Dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGS5312GB/12 Dishwasher

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 14, 2013 at 1:57 pm #75847
    oakleyjo
    Participant

    Hi,

    Been to look at this one today. The dishwasher doesn’t drain at the start of any cycle, it just goes straight into fill and once full it stops with no power being applied to heater or pump. No faults indicated.

    The drain isn’t blocked and pumps out no problem if I lift the float switch. The fill looks like it’s stopping at the right level.

    Any ideas?

    Thanks,
    Jon

    June 14, 2013 at 2:17 pm #396339
    Martin
    Participant

    Re: Bosch SGS5312GB/12 Dishwasher

    There’s either a mouse in the house or one of the module connections has come adrift I would think.

    June 14, 2013 at 8:00 pm #396340
    oakleyjo
    Participant

    Re: Bosch SGS5312GB/12 Dishwasher

    Many thanks Martin. I will go and check all the connections before I suggest replacing the module.

    Cheers, Jon

    June 20, 2013 at 8:17 pm #396341
    oakleyjo
    Participant

    Re: Bosch SGS5312GB/12 Dishwasher

    Just to complete the thread. The problem was with the control board. One of the tracks was burnt off when I opened it up and took a look. Working fine with a new board fitted.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.