Bosch SGS56E02GB/35

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGS56E02GB/35

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 8, 2007 at 4:23 pm #24893
    rocker
    Participant

    This dishwasher runs programe ok, but dosent drain at end and timer says 1 min machine cont running, if you press re-set buttons, machine drains but it impulses when doing so. can anyone please help… :rolls:
    org fault inlet valve open circuit, fitted new valve today. !!
    Cheers John

    February 8, 2007 at 5:14 pm #203706
    eastlmark
    Moderator

    Re: Bosch SGS56E02GB/35

    dont know your fault, but the impulsing when draining is both anoying and normal! Why i dont know.

    February 9, 2007 at 9:20 pm #203707
    rocker
    Participant

    Re: Bosch SGS56E02GB/35

    Been back today,machine runs cycle then empties then restarts the same programe over again. feel it may be pcb, but not sure!!!! can any bosch engineers advise please. John

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.