Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGS66E02GB/45 Dw
- This topic has 9 replies, 5 voices, and was last updated 20 years, 4 months ago by
Tubs.
-
AuthorPosts
-
December 9, 2005 at 4:52 pm #13950
Tubs
ParticipantAnyone have the plug/socket connections for above dishwasher module please?
previous engineer taken off module and just left in bottom of machine, obviously has a tinker and couldnt fix it
Steve
December 9, 2005 at 5:03 pm #157291Martin
ParticipantRe: Bosch SGS66E02GB/45 Dw
Easy peasy Steve as the module connector plugs only fit in their own slot. Just string out the wiring harness and each connector fits left to right. You can’t go wrong mate! ๐
December 9, 2005 at 5:18 pm #157292Tubs
ParticipantRe: Bosch SGS66E02GB/45 Dw
Thanks Martin
Friend just handed it to me and said this has got to go back on. So didnt get chance to check the loom situation out. (normally label them or change them one at a time)
Sounds a piece of cake to fit back in, just didnt want to go back and fit it and not know where the wires go ๐ . and look like a plum ๐ณ
Always the way when its one of ya mates, never is straight forward.
Module has blown track on the heater plug outlet, usually where it gets dry jointed on the old relay pins. Looks like too much current, but any other know causes?
Also any error codes for this baby?
December 10, 2005 at 7:26 pm #157293Tubs
ParticipantRe: Bosch SGS66E02GB/45 Dw
Tubs wrote:
Also any error codes for this baby?
Pretty please :wave:
December 10, 2005 at 7:35 pm #157294gegsy
ParticipantRe: Bosch SGS66E02GB/45 Dw
Hi
How good is your Spanish ๐E0
Ningรบn fallo
E1
Fallo en el calentamiento
E2
Fallo en la NTC
E3
Fallo de llenado
E4
Fallo en el posicionamiento del AquaSwitch
E5
Fallo en la tacomรฉtrica
E6
Fallo en el Aquasensor
E7
– – –
GregDecember 10, 2005 at 7:44 pm #157295Tubs
ParticipantRe: Bosch SGS66E02GB/45 Dw
gegsy wrote:Hi
How good is your Spanish ๐NTC
GregI recognise this bit ๐
December 10, 2005 at 7:45 pm #157296gegsy
ParticipantRe: Bosch SGS66E02GB/45 Dw
:rotl:
December 10, 2005 at 10:34 pm #157297Dave_Conway
ParticipantDecember 11, 2005 at 12:19 am #157298Penguin45
ParticipantRe: Bosch SGS66E02GB/45 Dw
Ok, Gegsy you heartless so and so….. From the “fish-in-the-ear”
Fallo – failure
Calentamiento – heating
Llenado (you sure that’s not Welsh?) – filling
Posicionamiento – positioning – timer?
Tacometrica – no idea – motor?HTH
Chris.December 11, 2005 at 12:56 am #157299gegsy
ParticipantRe: Bosch SGS66E02GB/45 Dw
Penguin45 wrote:Ok, Gegsy you heartless so and so….. From the “fish-in-the-ear”
Fallo – failure
Calentamiento – heating
Llenado (you sure that’s not Welsh?) – filling
Posicionamiento – positioning – timer?
Tacometrica – no idea – motor?HTH
Chris.Bi-lingual birds whatever next ๐
Spanish was only listing on tradeplace I reckon the Germans havin a laff eh Fawlty ??Greg
-
AuthorPosts
- You must be logged in to reply to this topic.
