Bosch SGV5613GB/12

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGV5613GB/12

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 23, 2007 at 10:07 pm #27580
    ChrisR
    Participant

    Hi guys.

    I`ve got to change the circulation pump on this dishwasher and have never done one before.
    What problems can I expect and whats the best way to do the job.

    Do the motors come complete with seals and impellors?.

    Any advice gratefully received.

    Chris.

    May 23, 2007 at 10:59 pm #214780
    gegsy
    Participant

    Re: Bosch SGV5613GB/12

    Hi
    The pump comes in bits and you have to assemble, so lets hope you were good at airfix when you was younger 😀
    Best way is to remove lid,losen base and remove r/h panel. Then lay it on its L/H side and do the job from there.

    Greg

    May 24, 2007 at 8:30 pm #214781
    ChrisR
    Participant

    Re: Bosch SGV5613GB/12

    Cheers Greg.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.