- This topic has 17 replies, 2 voices, and was last updated 11 years, 11 months ago by
.
-
Posts
-
Re: Bosch SL15K1B shows flashing active light but will not s
The 2nd (unused of this model) switch has no function. Also the Start button is missing on the top image……??
Re: Bosch SL15K1B shows flashing active light but will not s
Perhaps no user function, but in this case, pressed with the “official” reset, it caused led to flicker and a reset(full reset rather than partial ?. Prior to that the “official” reset on its own did nothing. This extra switch is mounted on the board physically and electrically connected and oddly, Bosch have even installed the white remote operating paddle. I have asked Bosch for a view but all may be a little academic as the 10 year model is hardly main stream.
The image is of the panel disconnected. The Start/Stop button partially falls back until panel is properly mounted.
With all that said it could be down to a flaky connector being made good with the moving. However giving the panel a gentle thump and shake did not indicate that. I’ll settle for serendipity.
- You must be logged in to reply to this topic.