bosch SMI2021GB/03

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch SMI2021GB/03

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 4, 2008 at 11:23 pm #33409
    Tom
    Participant

    the inlet solenoid valve is letting the water through very very slowly.
    ❓ Is it possible to replace this item or does the whole hose assembly need replacing?
    The bsh spares site shows P No 09 1058 ; aquastop device (just the valve)
    and P No 11 9922; aquastop device (the whole lot).
    there is a substantial difference in the cost of these two & possibly the ease of repair.
    Any guidance welcome.
    Thanks in advance &
    Best wishes to all for the Year ahead.
    tom

    January 4, 2008 at 11:36 pm #238539
    gegsy
    Participant

    Re: bosch SMI2021GB/03

    You can replace just the head unit 091058 😀
    Just needs some wire crimping and hose swapping, its better and cheaper then the whole gubbins 😉

    Greg

    January 4, 2008 at 11:49 pm #238540
    Tom
    Participant

    Re: bosch SMI2021GB/03

    Great ❗ this machine is 15 years old but looks like new & never needed attention before, so the more economical the repair the better. Says something for Bosch as well.
    Your usual quick & useful reply is much appreciated.
    tom

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.