Bosch SMS40C02GB/07 dishwasher filling issue

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SMS40C02GB/07 dishwasher filling issue

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 9, 2016 at 4:54 pm #87547
    lyndy
    Participant

    Afternoon,
    I have a problem with a Bosch dishwasher which starts to fill, after a few seconds then starts to drain and constantly does this until you switch the machine off.
    This particular model doesn’t have an impeller jug.
    Wondered if anyone has had this fault before and knows how to rectify it.
    Thanks in advance.

    February 9, 2016 at 5:23 pm #435224
    electrofix
    Moderator

    Re: Bosch SMS40C02GB/07 dishwasher filling issue

    poss left hand side of dishwasher blockages in hose going to sump and parts connected to it

    Dave

    February 9, 2016 at 5:24 pm #435225
    Martin
    Participant

    Re: Bosch SMS40C02GB/07 dishwasher filling issue

    Most often it is the Reed Switch (00611317) in the fill matrix unit that goes AWOL.

    February 10, 2016 at 10:29 am #435226
    lyndy
    Participant

    Re: Bosch SMS40C02GB/07 dishwasher filling issue

    Thank you for your replies.
    Martin, looking at the parts diagram I cant see it has a reed switch on it? Am i missing it?

    February 10, 2016 at 4:18 pm #435227
    Martin
    Participant

    Re: Bosch SMS40C02GB/07 dishwasher filling issue

    You are, it’s fitted in the side of the matrix. Slots in above the built in impeller.

    February 10, 2016 at 9:04 pm #435228
    nomadPaul
    Participant

    Re: Bosch SMS40C02GB/07 dishwasher filling issue

    Called a ‘contact’ .

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.