Bosch SMS50E02GB/02

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #62346
    mjhservices
    Participant

    Bosch SMS50E02GB/02
    Ends its wash with the plates looking like they have only had a 15 minute cold prewash although it was put on a normal cycle. The tablet is slightly disolved and there is undrained water in the dishwasher.
    This has happened a few times although when I am there nothing goes wrong?
    Any ideas anyone?

    #349782

    Re: Bosch SMS50E02GB/02

    Had similar thing last week. Seemed to me that the flow changer wasn’t switching the flow between the spray arms as it should. I stuck a screwdriver down the hole and I seemed to get it to move once but left it that it might require a whole new “instantaneous water heater.” Customer said it has worked OK since my visit, though. Could be there’s something down in there jamming the revolving blanking thing intermittently.
    Mike.

    #349783
    mjhservices
    Participant

    Re: Bosch SMS50E02GB/02

    thanks for that but it would not explain why at the end there was water left in the dishwasher? Drain pump ok.
    Mark

    #349784
    Martin
    Participant

    Re: Bosch SMS50E02GB/02

    mjhservices wrote:thanks for that but it would not explain why at the end there was water left in the dishwasher? Drain pump ok.

    I guess you’re not getting any error codes, E24 or E25 maybe?

    leavemetogetonwithit wrote:
    Could be there’s something down in there jamming the revolving blanking thing intermittently.

    It’s not that series machine Mike, it’s one of the latest m/c’s with a DC heatpump. Totally different beast I’m afraid and most are still under guarantee in fact. 😉

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.