bosch SRS45L12GB/18 dishwasher control module burnt resistor

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › bosch SRS45L12GB/18 dishwasher control module burnt resistor

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 7, 2014 at 11:25 pm #78909
    mbriody
    Participant

    Hi Can anyone help. My Bosch Dishwasher control module appears dead and after opening it a resistor set above the board is burned and open circuit. This resistor looks like controling the power to the board. Does anyone know what the value of this resistor is. Its worth a try to see if the machine will work.

    January 8, 2014 at 7:44 pm #407337
    scots
    Participant

    Re: bosch SRS45L12GB/18 dishwasher control module burnt resi

    Have tried eplacing this before and it blew straight away.

    Likely to be a fault elsewhere causing it to blow.

    From what I remember its 100ohms

    Brian

    January 12, 2014 at 12:20 pm #407338
    mbriody
    Participant

    Re: bosch SRS45L12GB/18 dishwasher control module burnt resi

    Thanks Brian but someone suggested it was 1000 ohm. Nervous to try if not correct.

    January 12, 2014 at 1:42 pm #407339
    scots
    Participant

    Re: bosch SRS45L12GB/18 dishwasher control module burnt resi

    I have a picture of said resistor, pm your email if required

    January 18, 2014 at 4:47 pm #407340
    mbriody
    Participant

    Re: bosch SRS45L12GB/18 dishwasher control module burnt resi

    Hi Brian. Thanks for you help. The result was as you predicted but at least I was prepared for the outcome. Thanks again for your help.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.