Bosch T/D WTE84102/GB05

[silverbroom]

Prior to visiting this tumble dryer (Wednesday), lady say’s the dryer goes for a few minutes then stops with the drying and anti-crease lights flashing.

Anyone have fault codes for this model most appreciated.

thanks

silverbroom

[BSH-MAN]

Re: Bosch T/D WTE84102/GB05

From memory, it’s the element NTC out of range.

[silverbroom]

Re: Bosch T/D WTE84102/GB05

Thanks for that, at least I know where to start.

silverbroom

[Phidom]

Re: Bosch T/D WTE84102/GB05

I went to one of these today. It runs for about a minute then goes dead, no lights lit or flashing. I tried bypassing the TOC on the heater but that made no difference. It will sometimes come on again after a minute or two, sometimes longer. There is a small PCB with a relay, mounted on the side at the top of the machine. I assume this must control the heater, as the motor still runs with the 2 thick wires to the board disconnected. With these wires off it still cuts out after about a minute. Any suggestions?

[Author]

Posts