Bosch Tumble dryer

[iadom]

WTA3003GB/01
FD 8308 004043

Label says Made in Europe but it is actually one of Yorkshire’s finest. 😉
Went last week, complaint of no heat. Pulled it out., pressed the reset button, got a nice click and away it went.

Vent hose perfectly clear and a good flow of air coming out of it.

Just been back, customer again complaining of no heat. Checked elements and TOC, tested OK. Put it back together and the heater came on perfectly when I tried it. 😕

Any other previous on these?

Jim.

[Martin]

Re: Bosch Tumble dryer

iadom wrote:Any other previous on these?

Usually it’s almost always the main stat (with the leads on) behind the heater plate. Also could be the exhaust stat in the front cowling. 😉

[iadom]

Re: Bosch Tumble dryer

Thanks Martin, its always a pain when they work whilst you are stood there. 😥

Jim.

[wilf]

Re: Bosch Tumble dryer

if its an intermittant fault I’d try the 60 deg stat first

wilf

[Martin]

Re: Bosch Tumble dryer

iadom wrote:Thanks Martin, its always a pain when they work whilst you are stood there. 😥

Indeed so Jim, the bain of our lives in fact, and why, after years of headscratching, I’m as bald as a bandicoot!!!! :rotfl:

[lerch]

Re: Bosch Tumble dryer

Is it the bosch / white knight dryer wtl6003 if so change both the rear stats in case one has gone weak and tripping at a lower temp.

[eastlmark]

Re: Bosch Tumble dryer

there is a kit available for constant trippers. 421309238041 which consists of both stat and toc, new heater mounting plate and element. We usually fit these to the MFI intergrated ones as they are a real pain to reach that re set button. £46 odd retail IIRC. though.

[iadom]

Re: Bosch Tumble dryer

Thanks for all the info folks, not had a recall yet.

Jim.

[Author]

Posts