bosch wf02465gb/01. wanted 2nd hand pcb….

[admin]

hi anyone got a 2nd hand working pcb for this machine
i need one

thanks

canufixit

[gandh1]

Re: bosch wf02465gb/01. wanted 2nd hand pcb….

defo have a wfo2466, but will check for a 2465, unless you know the 2466 will work… how much would you like to pay? 😉

[Martin]

Re: bosch wf02465gb/01. wanted 2nd hand pcb….

canufixit wrote:hi anyone got a 2nd hand working pcb for this machine

Sorry Mark I don’t have one but was just wondering what damage the board has suffered? As a rule they blow on the far right hand side (just to the right of the control knob in fact) and it’s almost always caused by the motor going AWOL….. 😯

[admin]

Re: bosch wf02465gb/01. wanted 2nd hand pcb….

gandh1 wrote:defo have a wfo2466, but will check for a 2465, unless you know the 2466 will work… how much would you like to pay? 😉

let me know price you are looking for…..whats the dif..between the wfo2466……and the wfo2465…board.. ❓

thanks

canufixit

[admin]

Re: bosch wf02465gb/01. wanted 2nd hand pcb….

Martin wrote:

canufixit wrote:
hi anyone got a 2nd hand working pcb for this machine

Sorry Mark I don’t have one but was just wondering what damage the board has suffered? As a rule they blow on the far right hand side (just to the right of the control knob in fact) and it’s almost always caused by the motor going AWOL….. 😯

Thanks for looking….yes this machine had blown top right,
i put another pcb from another machine and the machine works
again But programes dont match up as differant trim used on the model it come from.
(machine did have your sticker on )so may be one you have been to and condemend last week,brought it to use as rental
machine.

mark

[Author]

Posts