Bosch WFD2460GB/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WFD2460GB/01

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 31, 2009 at 5:58 pm #49768
    triphop27
    Participant

    Hi all

    been to the above machine today no agitation.brushes were down to a couple of mil so changed them and cleaned commutator but have still got no action. Could there be any other damage caused by brushes or any ideas welcome

    Thanks

    John

    October 31, 2009 at 6:00 pm #302239
    Penguin45
    Participant

    Re: Bosch WFD2460GB/01

    TOC in-line with armature – continuity test will tell.

    If the brush tails have scored the armature the pcb may have blown a track or two….

    Chris.

    October 31, 2009 at 6:20 pm #302240
    triphop27
    Participant

    Re: Bosch WFD2460GB/01

    Thanks penguin will check that tomorow

    john

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.