bosch WFO285SGB

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch WFO285SGB

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 23, 2012 at 8:32 pm #68073
    suedehead1
    Participant

    Hi the machine has a digital timer it gets to the spin part then it goes back up to 35 mins,

    any ideas welcome.

    February 23, 2012 at 10:34 pm #369502
    nomadPaul
    Participant

    Re: bosch WFO285SGB

    First check the heater to make sure its heating and then check motor insulation !

    February 23, 2012 at 10:39 pm #369503
    suedehead1
    Participant

    Re: bosch WFO285SGB

    ok thanks for the reply i will check them.

    March 1, 2012 at 10:07 pm #369504
    suedehead1
    Participant

    Re: bosch WFO285SGB

    checked motor and heater both ok,
    i changed the heater anyway but its still
    the same any other ideas or is it the pcb?

    March 1, 2012 at 10:36 pm #369505
    eastlmark
    Moderator

    Re: bosch WFO285SGB

    how old is this machine? It could be stuck on an error code. I had one that initially showed an error code to the customer but this then went but the machine was locked with 2 of the lights on. I cancelled the error following martins instructions, do a search! forgive me if its a totally different model altogether.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.