bosch wfo2865gb/01

This topic has 1 reply, 2 voices, and was last updated 13 years, 10 months ago by eng14.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
May 31, 2012 at 3:50 pm #69741

eng14
Participant

hallo all this w/m had carbons gone,no wash or spin.changed brushes now washes fine but has a quick burst of speed then time in window jumps to 1 minute without spinning,richard, 😕

May 31, 2012 at 5:15 pm #375819

Martin
Participant

bosch wfo2865gb/01

Motor insulation level too high as a rule. Lots of posts on the subject (see related posts below). Also PCB can go AWOL if the motor trips RCD during the failing of the old brushes…. 🙁
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.