Bosch WFO2866GB/07 dead.

[aqualectric]

Bosch WFO2866GB/07 auto washer. FD 8502.

Power to the mains suppressor; power to PCB; no display and no door lock on any programme position. 😕
I suspect the PCB has died: I have checked for blown solder joints and components – everything looks fine.
Should a Bosch PCB fall over this quickly? Or am I missing the bleedin’ obvious? :rolls:

Thanks,

Steve.

[clivejameson]

Re: Bosch WFO2866GB/07 dead.

aqualectric wrote:
am I missing the bleedin’ obvious? :rolls:

Thanks,

Steve.

You have checked there’s a neutral supply too? 😆

[aqualectric]

Re: Bosch WFO2866GB/07 dead.

Yes, I checked for 240V between the terminals on the suppressor and the supply cable to the PCB. So the board is getting a supply. 😕

Steve.

[gegsy]

Re: Bosch WFO2866GB/07 dead.

Dry joint on PCB quite popular 😉 Look around the selector area 😀

Greg

[aqualectric]

Re: Bosch WFO2866GB/07 dead.

I searched the PCB all over for dry joints – couldn’t find any suspects. 😕 I’m back to see it again on Tuesday so I’ll look again. She is already talking about scrapping it!! Hope I get there in time!!!

Thanks, Greg!!

Steve.

[Author]

Posts