Bosch WFR2466gb/01 weird fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WFR2466gb/01 weird fault

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 22, 2005 at 5:40 pm #10845
    cornwell40
    Participant

    This fault occurs when you get to the rinse or select rinse and spin.

    Fills up
    Yellow LED on start button comes on Rinse, Spin Speed and time to finish shows in display.
    Motor does a quarter turn and stops with a click (motor relay I think) and the display goes blank.
    Rinse and spin speed shows again.
    Time to finish is added to the display, yellow LED comes on, quarter turs display goes off 😕 .

    Repeat ad nauseum.

    Board maybe. Don’t ave a clue otherwise 🙁 .


    Tony C

    July 22, 2005 at 7:12 pm #142928
    Martin
    Participant

    Re: Bosch WFR2466gb/01 weird fault

    I had a similar fault a short while back on a WFR2460 (display went blank for a while) and it was the brushes causing a slight earth leak. Cleaning the commutator and replacing the brushes sorted it 😉

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.