Bosch WFX2867GB/06 F12 Fault code

[MARIO]

Went to machine would not spin. Would show 12 mins then drop to 1 min and finish . Machine would wash so ordered panel . Fitted new panel now shows F12 which it did not before . Therefore does this mean duff board or am I missing something . Thanks for any replies

[leavemetogetonwithit]

Re: Bosch WFX2867GB/06 F12 Fault code

Think this may have something to do with heater element. Not encountered it myself but read about it on here many times. Try a search e.g. Bosch + mins.
Mike.

[nomadPaul]

F12 is linked to the aquastop . Either you’ve not plugged it in or maybe the machine has water in the base ?

[MARIO]

Re: Bosch WFX2867GB/06 F12 Fault code

Thanks for replies but checked heater and this machine does not have flood protection . With original pcb in machine on wash, motor seems to try and spin instead of wash. Really want to know if board fault and whether to send back to Bosch. Anybody

[chalky]

Re: Bosch WFX2867GB/06 F12 Fault code

Did anyone find the problem as i have exactly the same problem 😕

[BSH-MAN]

Re: Bosch WFX2867GB/06 F12 Fault code

Module has not been correctly coded. :lesson:

It’s looking for a valve that’s not there.

[chalky]

Re: Bosch WFX2867GB/06 F12 Fault code

I’ve checked 😕 according to the sheet all of s1 set to on and s10 set to off and on?

[BSH-MAN]

Re: Bosch WFX2867GB/06 F12 Fault code

Try putting dip switch 7 to “off”

[MARIO]

Re: Bosch WFX2867GB/06 F12 Fault code

I sent the board back to BSH as l had set the board up correctly and they exchanged the board. When I fitted replacement board it worked ok.

[Author]

Posts