Bosch Worktop Dishwasher (SKT20)

[jos22]

I have one of these & this morning it went through the wash cycle but did not clean.

It appears the not enough water is entering the machine at the start of the various individual cycles. Mains water pressure OK but have not had time to test anything else. I am going away for a holiday today so thanks in advance for any help

[gegsy]

Re: Bosch Worktop Dishwasher (SKT20)

When you say not enough water, do you mean when it starts to recirculate the water the action is poor?
If so, it can be some debris in the recirc system obstructing the wash pump.

Un plug appliance before investigating :plug:

Greg

PS – Full model number is need for future diagnosis cheers

[Penguin45]

Re: Bosch Worktop Dishwasher (SKT20)

Whirring away happily and no circulation – impellor will have disintegrated.
P/no 065550, about £10 from memory.

An email to spares@ukwhitegoods.co.uk for confirmed prices and ordering.

Power off if removing the wrapper.

Regards,
Penguin45.

[gegsy]

Re: Bosch Worktop Dishwasher (SKT20)

You had a few of these?

Greg

[Penguin45]

Re: Bosch Worktop Dishwasher (SKT20)

Well, I keep the impellor in stock on the van……..
P45.

[gegsy]

Re: Bosch Worktop Dishwasher (SKT20)

Blimey, you must have hard water never changed one in 11 years 😆

What you lot up North doin to em 😉

Greg

[Penguin45]

Re: Bosch Worktop Dishwasher (SKT20)

Very soft water here. Have you looked at one of these, Gegsy? The impellor is pretty flimsy……..
:p45:

[gegsy]

Re: Bosch Worktop Dishwasher (SKT20)

Loads P, about 15 and usually debris and crud and some door hinge abuse.
Worth bearing in mind then these impellers?

Greg

[Penguin45]

Re: Bosch Worktop Dishwasher (SKT20)

I keep finding the blades sheared off……
P45.

[gegsy]

Re: Bosch Worktop Dishwasher (SKT20)

You are about right with impeller part no and price aswell 😉

Greg

[Author]

Posts