Bosch WTE84106GB T/D “Container” led intermittently flashing

[jontymox]

Good morning all,

I’m due to visit a laundry room to look at three of the above condenser tumble dryers which are displaying the above, although the water container/s are not full.

I realise there are several possible causes, but wonder if there is a particular/common reason for this fault, as I gather all three dryers only “play up” occasionally?

My customer confirmed that the filters and condensers are routinely cleaned, and I expect to be looking at possible causes such as partial blockages in the system, including the condenser circuit and pump areas.

However, as there are three dryers to attend to, I would be grateful for any feedback, and wonder if there is something such as a faulty sensor, which may be causing such an intermittent problem…

Thanks,

jonty

[electrofix]

most likley contaminated full sensor

a lot of later machines dont use a float but have 2 electrodes to detect water. if these get covered in wet lint they can give false readings

Dave

[kaibart]

I agree with dave probably the pump area is full if fluff and gives bad reading as dave has explained

[jontymox]

Thanks gents,

Visited yesterday, and all three dryers were as suggested.

Cleaned out pump/reservoir areas, and hopefully all good now.

Regards,

jonty

[Author]

Posts