Bosch WTE84107GB/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WTE84107GB/01

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • May 6, 2011 at 11:28 am #62627
    DDDave
    Participant

    This condensor dryer is flashing lights 1 and 4. I cant find a fault code for it . Can anyone help please. I have checked the reset on the element and checked for continuity through both ntcs but dont know what ohms they should be within.
    Thanks
    Dave

    May 9, 2011 at 7:44 am #350708
    DDDave
    Participant

    Re: Bosch WTE84107GB/01

    Anybody any ideas please ??

    May 9, 2011 at 9:53 am #350709
    electrofix
    Moderator

    Re: Bosch WTE84107GB/01

    suugest pm Beever

    memberlist.php?mode=viewprofile&u=3227

    he says he is a Bosch engineer so should be able to get servis info

    Dave

    May 9, 2011 at 12:34 pm #350710
    DDDave
    Participant

    Re: Bosch WTE84107GB/01

    Will do, thanks.

    May 9, 2011 at 3:41 pm #350711
    nomadPaul
    Participant

    Re: Bosch WTE84107GB/01

    If its ‘drying’ and ‘end’ led’s flashing , then thats a “not -heating” fault . The appliance isn’t seeing a rise in temperature after program start . I’d be double checking the temp limiter and heater element .

    May 9, 2011 at 8:08 pm #350712
    DDDave
    Participant

    Re: Bosch WTE84107GB/01

    Thanks Paul,I should have been clearer – the machine wont even start. As soon as the dial is turned to any program it beeps and flashs lights.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.