Bosch WTE84307GB-05 tumble dryer

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Bosch WTE84307GB-05 tumble dryer

Viewing 2 posts - 16 through 17 (of 17 total)
1 2
  • Author
    Posts
  • January 2, 2016 at 9:17 pm #433805
    melec
    Participant

    Re: Bosch WTE84307GB-05 tumble dryer

    That entrance is sealed is it not ?
    If you could get that seal perfect then nothing can get out logically speaking
    Just out of interest why not run it tilted back say put a 20/30 mm wide length of something under it
    Would at least tell you if water was coming from inside or forming outside the condenser???

    January 20, 2016 at 10:11 pm #433806
    greengrass1000
    Participant

    Re: Bosch WTE84307GB-05 tumble dryer

    Hi
    Terribly sorry for the late reply, I did not see your message.

    The dryer is raised 25/30mm at the front. No lead until you drag the condenser out which pulls the water underneath with it.
    This being what is sat under the plastic front housing of the condenser, not inside the machine.

    I really am lost for what to do.
    Anyone have an idea? :/

  • Author
    Posts
Viewing 2 posts - 16 through 17 (of 17 total)
1 2
  • You must be logged in to reply to this topic.