Bosch WVD24520GB/08

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WVD24520GB/08

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 6, 2018 at 5:50 am #93252
    Toni
    Participant

    Hi
    This machine apparently cuts out 1/2 way through a wash.
    The display goes blank (No lights), but if you reset the dial it comes on again.
    I have not seen this happen, but have been there and checked connections etc.
    I fitted a wash heater to this in November because it was blowing the trip, it was fine for a few weeks then it started happening. ( I have tested the heater again and seems fine)
    Could it be a module ? I don’t want to order one and then it happens again.

    Any help much appreciated
    Toni

    February 6, 2018 at 6:47 am #453701
    timdowning
    Participant

    Re: Bosch WVD24520GB/08

    I know the motor going out of circuit causes the display to go blank, so a check of the motor connector & brushes may be worth while.
    Also plugging the machine into another socket for a few goes just to eliminate a weird socket fault…

    February 6, 2018 at 8:40 am #453702
    Toni
    Participant

    Re: Bosch WVD24520GB/08

    Thanks, I will certainly try that when I go back

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.