Bosch WVT 1260

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WVT 1260

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 23, 2010 at 6:56 pm #52735
    PGS
    Participant

    Ive posted before on this appliance. Problem steam escaping from soap dispenser on dry. Ive fitted the container kit conversion but steam still escaping. My question is, is there a modified dispenser to tub hose to prevent this. Dispenser completly stripped and cleaned along with sump etc.

    February 23, 2010 at 8:20 pm #312910
    nomadPaul
    Participant

    Normal 3 causes of steam are :

    Blocked condensor box
    Faulty Condensor inlet valve
    Condensor container hose mod ( which you’ve already replaced )

    You could also make sure the dryer fan seal is seated properly .

    February 23, 2010 at 8:53 pm #312911
    PGS
    Participant

    Re: Bosch WVT 1260

    Thank Paul, all you mentioned has been checked. Its crazy because appliance is 3 yrs old and has just started to steam up. Thats why I thought maybe there was a revised disp hose.

    February 23, 2010 at 9:53 pm #312912
    PINKY
    Participant

    Re: Bosch WVT 1260

    There is no mod on the dispenser hose. 😥

    February 23, 2010 at 10:42 pm #312913
    PGS
    Participant

    Re: Bosch WVT 1260

    Thanks Guys

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.