bosch wvt1260gb01 not condensing

[yorkshireracer]

have a weird fault. The water inlet for dryer never seems to have a neutral. I’ve tested for a good 15 mins, pump comes in and out but no neutral to the valve. Are the 2 cut outs at the front open or closed circuit. When I tested them (hot) the front was open circuit and the one behind closed. Is this correct? Any ideas??

[Martin]

Re: bosch wvt1260gb01 not condensing

yorkshireracer wrote:havAre the 2 cut outs at the front open or closed circuit.

What cut outs are you on about? 😕

Valve failure is common on these especially on the dryer. Just try sticking a new valve in. 💡

[yorkshireracer]

Re: bosch wvt1260gb01 not condensing

Allready has new valve. 2 stats/cutouts on front of heater box.

[Martin]

Re: bosch wvt1260gb01 not condensing

yorkshireracer wrote:2 stats/cutouts on front of heater box.

Both are closed circuit of course otherwise no heat. 😉

[Author]

Posts