- This topic has 0 replies, 1 voice, and was last updated 17 years, 8 months ago by
.
-
Posts
-
hi all,
I went out to this oven about 2 months ago, i replaced the heating element as was open circuit, i also had to change the cooling fan as this was siezed.
after about 4 weeks the customer calls me to tell me the top of the oven keeps getting very hot so we went back out to her and found the cooling fan to not be running fast enough to have any effect.
we have now changed the fan again but the safety stat has popped (blue spot)
also the clock display has gone funny, i take it that i am responsible for the stat and clock.
were do i get these parts at a resonable price as brandt want to much i have tryed qualtex but they say they dont do these parts.
any ideas.
the clock will need repacing as the cooling fan runs all the time now (i take it this is controled by the clock)
any advise would be great.rgds
stuart
- You must be logged in to reply to this topic.