C57M70N3GB/39 wiring diagram

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › C57M70N3GB/39 wiring diagram

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • April 10, 2019 at 9:49 am #95737
    oscar123
    Participant

    Picked up a job via a handyman.. blowing monitor fuse and he has changed door switch assembly, not sure if he has cocked up wiring and put the block connectors on the right way round..

    Can anyone help please?

    April 10, 2019 at 11:19 am #461206
    electrofix
    Moderator

    when does it blow the fuse and what wires do you think are wrong ?

    dave

    April 15, 2019 at 12:29 pm #461207
    oscar123
    Participant

    Hi dave, it blows as soon as plugged in. I know the guy as changed the switch assembly.
    Oscar

    April 15, 2019 at 7:28 pm #461208
    electrofix
    Moderator

    well I have the same unit in the shop. if I know what you want can take a photo and post it

    Dave

    April 17, 2019 at 1:22 pm #461209
    oscar123
    Participant

    Hi Dave
    I need to know which way round the wiring for the door switches are.. I think he has them the wrong way round but a little reluctant to swap in case it damages the ultra expensive PCBs
    Oscar

    April 17, 2019 at 4:45 pm #461210
    electrofix
    Moderator

    ok will have to wait till next week but will strip the sides off and take a few shots and post them

    Dave

    April 25, 2019 at 12:08 pm #461211
    electrofix
    Moderator

    hope this helps

    Dave

    May 23, 2019 at 6:08 pm #461212
    oscar123
    Participant

    A Massive help Dave thankyou very much for going to the trouble!

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.