candy cin100t

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › candy cin100t

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 2, 2008 at 5:42 pm #34277
    mikehha
    Participant

    Hear we have a w/m that gets to the spin cycle tumbles then stops dead if you turn the power of then back on the m/c just tumbles and pumps for 30sec then gose dead again .I have fitted a pcb obtained from hoover/candy still dose the same ?

    February 2, 2008 at 6:14 pm #241963
    Penguin45
    Participant

    Re: candy cin100t

    Have you tried the timer/selector unit? 91201337, cheap.

    Chris.

    February 2, 2008 at 8:19 pm #241964
    mikehha
    Participant

    Re: candy cin100t

    yes that was the first thing i changed ( from emw)

    February 3, 2008 at 8:55 pm #241965
    admin
    Keymaster

    How many wires do you have on motor? if you have that model with two coils on stator, perhaps do you miss one…
    or pressure switch?

    February 5, 2008 at 5:38 pm #241966
    mikehha
    Participant

    Re: candy cin100t

    here`s one to remember changed the thermister and all is well.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.