- This topic has 2 replies, 2 voices, and was last updated 20 years, 8 months ago by
.
-
Posts
-
I have a candy condenser dryer, and the “empty water” is staying on when there is no water in the tray. Is there something I can do to fix this, or do I need to call an engineer? I have checked to see if the water tray is blocked somehow, and it isnt. I cannot get to the back of the machine to check the connection where the water tray goes into though.
Make:Candy
Model:CIC60 01
Reverse Action Condenser 6kgRe: Candy Condenser Dryer
It sounds as if the float switch has jammed in the “full” position.
It’s basically a piece of polystyrene that floats in the water container and operates a microswitch.
Not an expensive job to fix I wouldn’t imagine as long as that’s the problem, although a little tricky to get at.
Check Repairs@ for an engineer if you’re not sure, or if you do decide to have look, please unplug 1st :zap:
Dave.
- You must be logged in to reply to this topic.