Cannon Chichester timer failure

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Cannon Chichester timer failure

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 21, 2009 at 4:34 pm #50322
    keyhole
    Participant

    The digital timer on this cooker is refusing to stop flashing ‘Auto’, in spite of me following the user manual instructions to do this. In this fault mode, the main oven cannot be ignited, even manually. Total switch-off achieves nothing.

    Can these timers be replaced – or is it curtains for this cooker?

    November 21, 2009 at 5:25 pm #304399
    helo_75
    Participant

    yes quite easily

    is it gas?

    November 21, 2009 at 5:28 pm #304400
    helo_75
    Participant

    ooppss yes it is….

    need to have a gas safe guy do it, clocks are around £40 i think
    pluss fitting

    November 21, 2009 at 5:46 pm #304401
    keyhole
    Participant

    Re: Cannon Chichester timer failure

    Thanks for your reply. Any idea where I can get one from?

    Surprised that GASSAFE is involved. I would have thought this was an ‘electrical’ area, once the panels are off.

    November 21, 2009 at 7:30 pm #304402
    Penguin45
    Participant

    Re: Cannon Chichester timer failure

    Post the actual model number and we should be able to find you a part number.

    Penguin 45.

    November 23, 2009 at 7:01 pm #304403
    keyhole
    Participant

    Re: Cannon Chichester timer failure

    Sorry for the delay…

    Cooker Part No: 4866200093-01 according to the handbook.

    November 28, 2009 at 10:59 am #304404
    keyhole
    Participant

    Re: Cannon Chichester timer failure

    Anyone???

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.