- This topic has 3 replies, 2 voices, and was last updated 13 years, 2 months ago by
.
-
Posts
-
We have a 4 year old Professional 1000. Just in the last few days, the front RH ring has stopped sparking for some reason. Gas is flowing OK, it’s all clean, and I cleaned the electrode, but although all the other rings spark OK this one doesn’t.
Funnily enough, the current is still there though, as I found out when I pressed the button whilst touching the electrode! Quite a belt!
I presume therefore that there’s a voltage drop for some reason, and not enough voltage at the electrode to induce the arc?
Anyone any advice? It’s just an electrical problem on the igniter circuit so I don’t need to do anything on the gas side. 😕
Re: Cannon Professional 1000 one ring not sparking
Probably the porcelain electrode is cracked? You now have first hand knowledge of the dangers of messing with high voltage and I wouldn’t advise you proceed further but call out an approved repair agent. 😉
Re: Cannon Professional 1000 one ring not sparking
High voltage but very low current, one presumes 😉
- You must be logged in to reply to this topic.