caple di414

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › caple di414

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 28, 2009 at 5:34 pm #45308
    robbo1973
    Participant

    been here today for the guys w/m he said d/w was playing up you close door starts to empty then 6 flashes which i read as inlet off,his water is on fine he is gonna pull it out as built in badly going back next week.any thoughts on this.

    854541415710

    cheers chris

    May 1, 2009 at 5:35 pm #285252
    Jonah
    Participant

    Re: caple di414

    Its made by Whirlpool, probably faulty pressue switch part number 481227128556, check base is not flooded as well.

    May 28, 2009 at 4:48 pm #285253
    robbo1973
    Participant

    Re: caple di414

    thanks for reply finally got back to this and found the valve o/c replaced and now it is coming up as continous filling,when you try and reset it empties then starts to fill again.any advice appreciated.

    cheers chris

    May 28, 2009 at 4:55 pm #285254
    Jonah
    Participant

    Re: caple di414

    Could be the flow meter, its connected onto the fill chamber

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.