Caple hood

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Caple hood

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • January 5, 2007 at 10:33 pm #23885
    eastlmark
    Moderator

    Got Caple hoods coming at me from all directions.
    not recognised by connect the models are:

    STU/3
    and
    STUD (really, that is the model off the rating plate!)
    need the switch PCB and they both look the same part. any ideas on this one?

    January 6, 2007 at 9:19 am #199729
    kwatt
    Keymaster

    Not got a clue on those ones Mark, are tehy under warranty?

    Used to be with AIS that service info on Caple was, err.. lacking and GS always said that was down to no info from Caple.

    K.

    January 7, 2007 at 9:45 am #199730
    eastlmark
    Moderator

    Re: Caple hood

    No, they are a good few years old.

    January 7, 2007 at 11:58 am #199731
    kwatt
    Keymaster

    Dunno then Mark, but I’ve a few in the office with of course no part number on them so if you’ve got a photo I can maybe find you a match.

    K.

    January 7, 2007 at 2:36 pm #199732
    eastlmark
    Moderator

    Re: Caple hood

    Best described as a square shaped board abour 4cm x4cm, 2 slide switches one being single position (lights) the other four position.

    January 7, 2007 at 2:48 pm #199733
    kwatt
    Keymaster

    I’ll try to remember to have a look in the morning. 😕

    K.

    January 8, 2007 at 10:24 pm #199734
    eastlmark
    Moderator

    Re: Caple hood

    Customer just told me their order stated model STU90SS2 not that there is anything on the hood to support this. Done a PNE on connect but dont hold out much hope.

    January 8, 2007 at 10:26 pm #199735
    kwatt
    Keymaster

    Sorry Mark, I forgot. 😳

    K.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.