Caple WDI 1210 Intergrated W/D

Home Forums Trade Technical & Spare Parts Forums Trade Spare Parts Caple WDI 1210 Intergrated W/D

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #33479
    goosegreen
    Participant

    After a source for a set of brushes for the above, The machine looks like the old Neff washer Dryer which was definitely not made by Neff. I seem to remember that Anglo Iberian used to deal with Caple, are they still going? Not seen these brushes before they have red holders.


    Cheers

    Goose

    #238866
    Penguin45
    Participant

    Re: Caple WDI 1210 Intergrated W/D

    Siltal………

    49527000 – CESET motor
    49527100 – SOLE motor

    Chris.

    #238867
    goosegreen
    Participant

    Re: Caple WDI 1210 Intergrated W/D

    Thanks Chris, looks like the Sole ones. Have ordered from MP.

    Goose

    #238868
    ANDYVIVO
    Participant

    Re: Caple WDI 1210 Intergrated W/D

    Hi,
    Have also known there to be IDE motors also in red housing on Siltal machines, UN12104.
    Regards Andy

    #238869
    goosegreen
    Participant

    Re: Caple WDI 1210 Intergrated W/D

    Cheers Andy just ordered them as well.

    Goose

    #238870
    Simon46
    Participant

    Re: Caple WDI 1210 Intergrated W/D

    Probably an ide motor. repaired one recently.

    S.

    #238871
    goosegreen
    Participant

    Re: Caple WDI 1210 Intergrated W/D

    Thanks Simon , Just read your previous post and that looks like what I’m after never seen a brush like that before! Going to make a bit on this one, Cust thought he would have a look before calling any one, And did the old, Pull machine out without checking the hose length, Nasty sound of high pressure water flooding his kitchen at an alarming rate, He managed to isolate the supply at the stopcock and I called withing the hour and capped of the tap ends and told him I will call again on Thursday, But be prepared to pay 😛

    Goose

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.