- This topic has 1 reply, 2 voices, and was last updated 16 years, 1 month ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi Sorry if I’m repeating anything previously said but my CDA 447 is beeping and flashing and on reading previous posts I feel it could be the flooded tray but how does that come out. I have accessed the base at the front and there is a black plastic plate, does that pull off? . Thanks in advance. mark
Re: CDA CW447
It looks rather like the usual Chinese tat, unfortunately. Black plastic inserts can be prised out and any water syphoned out (with tghe power off). It is often easier and quicker to pull the machine out and tip it to one side to drin the tray.
If it re-sets, torch and observation time.
Penguin45.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.