cda dishwasher WC140IN not working flash light 1, 2, 5

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › cda dishwasher WC140IN not working flash light 1, 2, 5

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 17, 2020 at 4:28 pm #97210
    vostro0129
    Participant

    My cda dishwasher WC140IN starts but after a few mins starts beeping and the error lights indicate “inadequate water supply”. There is water getting to the machine and the inlet hoses are not kinked or blocked. It sounds and the hose feels as like the machine is taking in water and then discharges some water. The cycle carries on then stops and beeps. When I open the door during the cycle, I can see some cold water (about 5cm deep) in the dishwasher, but when it is beeping there is no water in the dishwasher, so I presume the water inlet and drain are working….

    Anyone has any ideas? thanks

    April 20, 2020 at 11:51 am #466571
    IJF
    Participant

    I am having exactly the same problems. Thanks for any help you may have.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.