Couldn’t hold out

[dmajohnson]

Partly because I couldn’t wait any longer for the new ISE10 and partly because of other reasons I have decided to purchase a Miele W-5740 from Comet.

The deal I got was as follows:

Store price £999.99 reduced to £949.00 (Expensive to start with I know):

Appliance Installation £17.50
Recycling service for old appliance £9.95
Comet Standard Delivery £19.95
MIELE W-5740 £949.00

Sub Total (inc. VAT) £996.40
Discount £-66.43 (Typed in 7{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} discount code)

Total Paid £929.97

I also expect to get 3{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} Cashback (£27.90) from Quidco which gives a grand total of £902.07 with the promotional 10 year Miele Warranty.

Gets express delivery on Monday, I just hope it fits 😮

[odom]

Re: Couldn’t hold out

Good machine but takes more than two hours to complete the cottons programme. Over the course of 10+years that’s going to add up 😕

[suedehead1]

Re: Couldn’t hold out

dmajohnson wrote:Partly because I couldn’t wait any longer for the new ISE10 and partly because of other reasons I have decided to purchase a Miele W-5740 from Comet.

The deal I got was as follows:

Store price £999.99 reduced to £949.00 (Expensive to start with I know):

Appliance Installation £17.50
Recycling service for old appliance £9.95
Comet Standard Delivery £19.95
MIELE W-5740 £949.00

Sub Total (inc. VAT) £996.40
Discount £-66.43 (Typed in 7{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} discount code)

Total Paid £929.97

I also expect to get 3{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} Cashback (£27.90) from Quidco which gives a grand total of £902.07 with the promotional 10 year Miele Warranty.

Gets express delivery on Monday, I just hope it fits 😮

what this an advert?

[quickwash]

Re: Couldn’t hold out

hi, i know which one i will be choosing and it wont be miele! When i read the post after reading the previous one on the ise10 v miele i was 😯 when you chose the miele over the new ise10, apart from not being able to ‘hold out’ what would the other reasons be? The parts and labour costs will make your eyes water after your warranty runs out, so the saving of £47 couldnt have been the reason for your choice surely? I have read that a lot of local repairers wont or cant repair a miele, especially the newer models. I had previously considered a miele but after making a few enquiries i found out that the newer miele machines need a dianostic tool that only miele engineers carry, dont quote me, but this is what i read and it seems quite plausible, as this is the way most things are going nowadays! Or if the engineer could fix the machine he could still not reset the fault code, with miele offering to send an engineer to reset it for £130 because they wouldnt give this information even to the trade! Whether this is all correct i dont know but it has turned my head from miele and i was relieved to find out about the ise products which give the same or better quality and longevity without needing ‘special engineers’ and making parts that are way too exspensive. I give a big :tup: to the guys at ise and they will also be getting my custom. 🙂

[Jaunty]

Re: Couldn’t hold out

Hello to the OP dmajohnson

Just wondered how you had been getting on with your Miele? I am considering it too at the moment.

[Author]

Posts