Creda 17057E

[reaper]

Oldie but goodie – 3 wires out of the motor plug, I need a wiring diag or schematic diagram to connect a new plug please.

[timdowning]

Re: Creda 17057E

I think the wires in the loom at the timer connector end run in the same sequence at the motor plug end.

(check it out with the the 3 wires that are ok. see what position they are at the timer connector.)

[reaper]

Re: Creda 17057E

This is one of the older machines with the motor plug wires going to various plugs on the programmer, I think its equivalent to one of the 95 series but Ive not got the service manual on this one.

[iadom]

Re: Creda 17057E

Happy New Year. 😉

Jim.

[reaper]

Re: Creda 17057E

Thanks Jim but theres two versions of this model and mines the early one with programmer at the top and module attached to the base.I found a wiring diag for a 17038 which corresponded except all the motor wires were colour coded and the ones on the 17057E are all white – so I had to trace them all.It took me over an hour but everythings now hunkydory.Happy New Year.

[Author]

Posts