Creda 37747 condensor dryer

[larry]

Can anyone help i went to repair a creda 37747 dryer with no heater coming on thought it would be the stats but no their ok ,then noticed the full light was on all the time just wondering if this is a fault code or would it be a fault in the dryer module Thanks Larry. 😕

[iadom]

Re: Creda 37747 condensor dryer

Which module would that be. ❓

The float switch will keep the ‘full’ light on and prevent the heater from operating.

It is either full of water, the float chamber is full of gunge and water or the float switch itself has failed or stuck.

Jim.

PS. This machine is well before fault codes and most dryer modules for that matter. 😉

[larry]

Re: Creda 37747 condensor dryer

Thanks for the help ithought their was a reversing module that also turned the heater of when turning the one way

[iadom]

Re: Creda 37747 condensor dryer

There is a reversing timer in the base but the Full light on is pointing you in the correct direction.

The float chamber is a pig to get at and if it is really gunged up then changing it is the best option, check the float switch itself first though.

Jim.

[larry]

Re: Creda 37747 condensor dryer

Thanks very much Jim.

[Author]

Posts