Creda 37764 Condenser Dryer. No Heat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Creda 37764 Condenser Dryer. No Heat

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 1, 2007 at 9:19 pm #32664
    spanner51
    Participant

    When I first switched this dryer on it heated for 30 secs then no heat atall.
    Cut outs = OK
    Heater = OK
    Timer = OK

    Am I right in thinking that when the reversing timer reverses for 15 secs it cuts off the heater? Could this be the problem? Any suggestions or a wiring diagram would be appreciated

    December 1, 2007 at 10:13 pm #235917
    slate
    Participant

    Re: Creda 37764 Condenser Dryer. No Heat

    have you checked the front stat?

    December 2, 2007 at 12:17 pm #235918
    bubs
    Participant

    Re: Creda 37764 Condenser Dryer. No Heat

    If Front stat ok, change the timer.
    Graeme

    December 2, 2007 at 7:53 pm #235919
    bagman
    Participant

    Re: Creda 37764 Condenser Dryer. No Heat

    Have replaced several timers on these for not heating.

    December 7, 2007 at 3:45 pm #235920
    spanner51
    Participant

    Re: Creda 37764 Condenser Dryer. No Heat

    Thanks to bubs and slate. It was the front stat.
    Job done.

    Although I removed the front panel before I realised that the stat could be changed from the door opening. Nothing beats learning the hard way.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.