- This topic has 3 replies, 3 voices, and was last updated 14 years, 11 months ago by
.
-
Posts
-
Serial number 06100Z49. I’ve got the top off it and the belt’s gone. There’s a 2005 post about this model number on the forum which brought me here, but the reply link is dead. Most likely candidate seems to be the belt listed for 37545M001Q (BLT8687) but, y’know, I’m a total noob. Broken belt just about has the readable number 2394 stamped on the non-drive side. All advice gratefully received.
Re: Creda Reversair DL Spec 37545T001Q
Hi Steve,
The cheapest option is this drive belt from what I can see.
The belt will be very tight though I expect, I think it’s one of the “stretch” ones which often appear almost impossible to fit at first.
HTH
K.
Re: Creda Reversair DL Spec 37545T001Q
Belt should be a C00208081.
A jockey pulley machine so belt is slack to fit until you slide it over the two jockey pulleys. 😉
PS. There is no model 37545T001Q listed, only 375450001L and 37545M001Q
If it has a T in the model number it could have been imported.
- You must be logged in to reply to this topic.