CTD00P

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #32272
    grendel
    Participant

    Hi guys, went to one of these this morning, when you switch on, the Bitron door lock makes a quick buzz and thats your lot… Checked heater continuity OK, tried a new door lock, just the same. Had a bad morning so couldn’t be bothered to hang around messing about, am going back next Friday so any info to go armed with would be appreciated 😀

    #234406
    kiddo66
    Participant

    Re: CTD00P

    I know its obvious but was the door switch pin still in position?

    #234407
    grendel
    Participant

    Re: CTD00P

    Yes, pin still in position otherwise you wouldn’t get the buzz/click from the door lock.

    #234408
    whitevanman
    Participant

    Re: CTD00P

    relay start???

    #234409
    grendel
    Participant

    Re: CTD00P

    No mate, Bitron type door lock…

    #234410
    helo_75
    Participant

    id still be checking the pins activating the lock.. for reference, the bitron door lock will buzz whether the door is open or closed

    ive had a few twisted doors

    try stickin a screwdiver firmly through the hole to be sure

    othe than that, itll be timer, but i reckon yer problems with the door

    #234411
    grendel
    Participant

    Re: CTD00P

    Cheers helo I’ll go with the timer then, already had my screwdriver in the hole OOOHH ER MRS 😆 😆

    #234412
    johnnyj
    Participant

    Re: CTD00P

    Sounds more like the door lock jj

    #234413
    helo_75
    Participant

    and the original post where he states he tried a door lock?

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.