D and G work

Home Forums General Trade Forum D and G work

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #80765
    stevebunyan
    Participant

    I could do with some advice on what to charge for there work and parts mark up. Obviously I have my standard rates but don’t want to go in too cheap if I could get a bit more.
    Any advice welcome.
    Thanks


    Clarence William Appliance Repair
    http://www.clarence-william.co.uk

    #414082
    Martin
    Participant

    Re: D and G work

    Do DAG read these forums I ask myself?

    #414083
    funkyboogy
    Participant

    Re: D and G work

    standard markup roughly about 25{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} i would think – dag may want lower rates.

    #414084
    admin
    Keymaster

    Re: D and G work

    standard mark up is 15{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} , I have had a couple of claims rejected because they said my mark up was too high !!!

    #414085
    madangler1
    Participant

    Re: D and G work

    Whilst on this subject how does one get on d&g contractor list ?

    #414086
    Martin
    Participant

    Re: D and G work

    madangler1 wrote:Whilst on this subject how does one get on d&g contractor list ?

    Don’t wait for the mountain to come to Mohammed but contact them yourself. 💡

    #414087
    funkyboogy
    Participant

    Re: D and G work

    they use connect for most of their work ,

    if your rural there’s more of a chance of them calling you.

    not the easiest to work with – re claims rejections for this that and the next thing

    #414088
    lee8
    Participant

    Re: D and G work

    Golden rule how low can you go, don’t go there, always stay above or walk away, 3 good calls non D&G are far better than 6 D&G, when you add up all the leg work, they’ll be happy with 5{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} or even better free. If your 25{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}, your nearest is on 15{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}, guess who gets the work.

    #414089
    stevebunyan
    Participant

    Re: D and G work

    So who is doing D&G work?


    Clarence William Appliance Repair
    http://www.clarence-william.co.uk

    #414090
    Martin
    Participant

    Re: D and G work

    stevebunyan wrote:So who is doing D&G work?

    Huh? Are you asking for a list of all the indies around the UK that do DAG contract work or what exactly do you mean?

    #414091
    burns
    Participant

    Re: D and G work

    We did the work for a year or so, couldnt control the volume. 30 jobs one day non the next. Constant hassle from escalations department, treated like sh7t from overlimit department. Completely manual process, posting invoicess off. Send fifty by post and get twenty back for no reason, then resubmit without change to be paid next time.
    Overall it gave us volume at an early stage, but took over my life and theres no loyalty. In today out tomorrow. We dropped it after the last survey. Agree with lee 3 own good calls better than 6 d&g.
    If you could control the brands, volume and processes it would be fantastic. But the phone traffic was so heavy we used a third party call centre to take the calls who are just given your number, was another big cost detracting from the viability. Do I sound bitter?

Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.